Based on our experience tinting the 2022–present Toyota Tundra, 20% window film on the two front doors provides a good visual match to the factory rear privacy glass.

That's one of the most common setups we see from Tundra owners who don't want to darken the entire truck.

The 2026 Toyota Tundra pictured throughout this guide is an actual customer vehicle we tinted at Dope Tintings in Pennsauken, New Jersey.

We installed 20% window tint on the two front doors to visually match the factory rear glass.

At Dope Tintings in Pennsauken, NJ, our current pricing for the four doors and power rear window of a 2022–present Toyota Tundra is:

A complete four-door and rear-window installation generally takes approximately 2 to 2½ hours.

If you only want the two front windows tinted to match the factory rear privacy glass, installation typically takes approximately 45 minutes to 1 hour.

Contact us for current two-window pricing.

The Toyota Tundra pictured throughout this article is a real 2026 Tundra we tinted at Dope Tintings in Pennsauken, New Jersey.

This customer didn't want to darken the entire truck.

The goal was simple:

Make the two clear front windows visually match the darker factory rear privacy glass.

We installed:

• 20% window tint on the driver's front window
• 20% window tint on the passenger's front window
• Factory rear privacy glass remained as-is

The result creates a much more consistent appearance from the front doors to the rear of the truck.

For many Tundra owners, that's all they're looking for.

Yes.

Based on our experience working on this generation of Toyota Tundra, 20% aftermarket window film provides a good visual match to the factory rear privacy glass.

There's an important distinction:

We're talking about a visual match.

We're not claiming every Tundra's factory rear glass itself measures exactly 20% VLT.

Factory privacy glass and aftermarket window film are different products.

When a customer asks us to "match the factory tint," we're trying to make the two front windows look consistent with the darker rear glass when viewing the truck from outside.

For the 2022–present Tundra, 20% works well for that purpose based on our installation experience.

Appearance is one of the biggest reasons.

The Tundra already comes with darker-looking privacy glass behind the driver on many configurations.

The two front door windows don't have that same dark appearance.

That can make the truck look unfinished to some owners.

Adding approximately 20% film to the two front doors creates a much more consistent appearance from front to rear.

If the customer is happy with the darkness of the factory rear glass, there may be no reason from an appearance standpoint to make the rear darker.

That's exactly what the owner of the 2026 Tundra featured in this article wanted.

At our shop, tinting the two front windows of a 2022–present Toyota Tundra generally takes approximately:

45 minutes to 1 hour.

The front doors themselves are relatively straightforward for an experienced professional.

That makes a two-window factory-match installation considerably quicker than tinting the entire truck.

Overall, we consider this generation of Toyota Tundra a relatively straightforward vehicle for an experienced professional window tinter.

The front doors are straightforward.

The rear doors are straightforward.

The gaskets aren't unusually tight.

We don't need to remove the door panels with our normal installation process.

But there is one part of this Tundra that makes it different from many other pickup trucks:

The power vertical rear window.

Many pickup trucks use fixed rear glass or a smaller sliding section within the rear window.

The Toyota Tundra is different.

Its rear glass can power vertically up and down.

From an owner's perspective, that's a great feature.

From a window tinter's perspective, it changes the installation process.

We can't treat that rear glass exactly like a fixed pickup-truck window.

The film needs to be installed correctly so it continues to work with the moving glass.

Yes.

The power rear window on the 2022–present Toyota Tundra can be professionally tinted.

However, proper preparation and film positioning are important.

Because the glass moves up and down, the film needs to extend properly below the gasket.

If the installation stops too high or isn't properly positioned below the gasket, the moving glass can create problems with the film.

That's why this part of the Tundra requires more attention than the front or rear door windows.

It can if the film isn't installed properly.

One of our biggest concerns with the Tundra rear window is making sure the film extends appropriately below the gasket.

If it doesn't, operation of the power window can potentially catch the film and lead to peeling.

That's not something the customer should have to think about every time they lower the rear window.

The installer should account for it during installation.

This is one of the reasons vehicle-specific installation experience matters.

Preparation is especially important.

Because the rear glass operates vertically, we need to prepare the window so the film can be properly installed below the gasket.

The installer also needs to operate the window during the installation process.

This makes the rear glass more labor-intensive than a normal fixed pickup-truck rear window.

For an experienced installer, it's completely manageable.

But it's not something we'd recommend learning for the first time on a customer's truck.

No.

We consider the front doors on this generation relatively straightforward.

The gaskets aren't unusually tight and there's adequate working room for an experienced installer.

That's one reason a two-front-window factory match can generally be completed in approximately 45 minutes to 1 hour at our shop.

The rear door windows are also straightforward for an experienced professional.

The unusual part of a complete Tundra installation isn't the doors.

It's the power rear glass.

There aren't separate small quarter windows that create an additional installation challenge for us on the Tundra configuration we're discussing.

That helps keep the door-glass portion of the installation relatively straightforward.

With our installation process:

No.

We don't need to remove the door panels on the 2022–present Toyota Tundra for a normal window tint installation.

The doors and gaskets give us enough working room to complete the installation without unnecessary panel removal.

At Dope Tintings, tinting the four doors and power rear window generally takes approximately:

2 to 2½ hours.

Although the door windows are straightforward, the power rear glass requires additional preparation and installation work.

We would rather account for that time than rush the rear-window installation and create a potential peeling problem later.

From a film-installation standpoint, the Tundra windshield is relatively straightforward for an experienced professional.

The bigger concern is protecting the truck during installation.

Windshield tint requires installation solution.

Modern trucks contain sensitive electronics behind and below the dashboard.

That means controlling that solution is just as important as positioning the film correctly.

Before tinting the full windshield, we properly protect the lower windshield and dashboard area.

The goal is to minimize installation solution traveling behind the dashboard where sensitive electronics are located.

This isn't unique to the Tundra, but modern vehicles make this increasingly important.

A professional windshield installation isn't simply about putting a large piece of film on glass.

Protecting the vehicle is part of the installation.

Installation solution needs to be carefully controlled.

If excessive solution reaches sensitive electronics behind the dashboard, electrical problems can potentially occur.

Depending on what becomes affected, symptoms could involve systems such as:

• Power-window operation
• Horn operation
• Windshield-wiper operation
• Other electronically controlled functions

That doesn't mean tinting a Tundra windshield automatically causes electrical problems.

It means proper preparation and solution control are essential.

This is why we recommend having full-windshield tint installed by someone experienced with modern vehicles.

This guide focuses on the 2022–present Toyota Tundra generation.

Toyota introduced the redesigned third-generation Tundra for the 2022 model year.

Although features, packages and equipment have evolved since 2022, the vehicles discussed here belong to the same general generation from an installation standpoint.

Our featured customer vehicle is a 2026 Toyota Tundra.

Depending on model year and configuration, this Tundra generation includes familiar trims and configurations such as:

• SR
• SR5
• Limited
• Platinum
• 1794 Edition
• TRD Pro
• Capstone
• i-FORCE MAX configurations

Packages such as TRD Off-Road can also change the equipment on individual trucks.

Not every feature is available on every trim or every model year.

When requesting a window tint quote, it's helpful to give us:

Year + Toyota Tundra + trim + cab configuration

That gives us a better idea of exactly what truck we're working with.

It can.

The basic door-glass installation remains similar, but equipment can vary substantially between trims.

Higher-equipped Tundras may include additional technology and larger glass areas such as an available panoramic roof.

Those differences become particularly important when discussing:

• Full windshield tint
• Heat rejection
• Panoramic-roof tint
• Ceramic film
• Complete vehicle coverage

That's why we don't assume every Tundra is configured identically.

If your Tundra has a panoramic roof and your primary goal is maximum heat rejection, that glass should be part of the conversation.

Think about where solar energy enters the cabin.

If you purchase premium heat-rejection film for the doors while leaving the windshield and a large panoramic roof untreated, you're leaving two major glass areas uncovered.

For maximum performance, we recommend thinking about the vehicle as a complete glass system rather than treating each window independently.

At Dope Tintings, our current pricing for the four doors and rear window is:

Standard film is an option for customers primarily interested in appearance, privacy and professionally installed window film without moving into our higher-performance packages.

Carbon is a strong middle option for customers looking for additional heat rejection without paying ceramic-film pricing.

If you're only tinting the two front windows and heat rejection matters, carbon is typically the direction we recommend discussing.

Ceramic is our higher-performance option for customers looking for significantly greater heat rejection.

But we don't automatically tell every Tundra owner to buy ceramic.

How much glass you're tinting matters.

If you're only tinting the two front doors and want more than appearance, carbon can make a lot of sense.

A customer might want:

• A factory-matched appearance
• Additional privacy
• Better heat rejection for the driver
• Better heat rejection for the front passenger
• A lower price than ceramic

In that situation, carbon can provide a strong balance.

This is why we don't automatically push customers into the most expensive film.

If your only goal is heat rejection from the two front doors, we generally don't recommend automatically paying for ceramic just because it's the highest-performance package.

There can be exceptions based on an individual's specific needs.

But for the typical customer only tinting two front windows, carbon can provide a better balance between cost and performance.

If you're considering ceramic because you want maximum heat rejection throughout the truck, that's a different conversation.

If maximum heat rejection is your priority, don't focus on only two windows.

Think about the entire glass area.

Depending on your Tundra's configuration, that can include:

• Front door windows
• Rear door windows
• Power rear glass
• Full windshield
• Sunroof or panoramic roof

Carbon can provide good heat rejection.

Ceramic takes performance considerably further.

But the film can only work on the glass where it's actually installed.

That's why a more complete installation makes sense when maximum heat rejection is the goal.

You can.

Whether you should depends on your goal.

If you simply want the two front doors to look like the rear, leaving the factory rear privacy glass alone may be all you need.

That's exactly what our featured 2026 Tundra customer chose.

If your goal is:

• Additional heat rejection
• More privacy
• A darker appearance
• Film performance across the rear glass

then applying aftermarket film over the factory privacy glass may make more sense.

No.

Factory privacy glass and aftermarket automotive window film aren't the same product.

Privacy glass gets its darker appearance from the glass itself.

Aftermarket window film is applied to the interior surface of the glass.

That's why a customer can have factory-darkened rear glass and still choose to install aftermarket film over it for additional performance or darkness.

And it's why we describe 20% on the front doors as a visual factory match rather than claiming the glass itself is exactly 20%.

There's no single percentage that's best for every Tundra owner.

If your goal is specifically to visually match the factory rear privacy glass on this generation, 20% is the percentage we commonly use on the two front doors.

But another customer may want:

• Lighter front windows
• Darker overall tint
• Maximum privacy
• Better nighttime visibility
• Maximum heat rejection

We don't automatically recommend a percentage before understanding what you're trying to accomplish.

For a factory-match appearance, yes.

Based on our experience with the 2022–present generation, 20% provides a good visual match between the two front doors and factory rear privacy glass.

That's one of the most common Tundra setups we see when the customer doesn't want to tint the entire truck.

Yes.

Not everyone wants the fronts to match the rear.

Some customers prefer a lighter appearance or are more concerned about visibility.

There's nothing visually wrong with choosing something lighter.

20% is simply our typical choice when the customer's specific goal is:

"Make my front windows look like my factory rear windows."

No.

Toyota Tundra pickup trucks don't qualify for our $99 window tint special.

Pickup trucks are excluded from that package.

No.

The Tundra doesn't qualify for the $149.99 special either.

Again, pickup trucks are excluded.

Contact us for current two-front-window pricing or use the full Tundra pricing listed in this guide.

You don't need to detail the outside of the truck before bringing it to us.

We're more concerned with the interior around the glass.

For the cleanest possible installation, try to bring us a reasonably clean vehicle without excessive:

• Pet hair
• Dust
• Loose debris
• Smoke residue
• Dirt around the windows
• Interior clutter

A cleaner starting environment helps us control contamination during installation.

Window tint is a hand-installed product, so realistic expectations matter.

But that doesn't mean obvious dirt, hair and poor workmanship should simply be accepted.

Proper preparation and contamination control are major parts of a professional installation.

Read our complete guide:

How Much Contamination Is Acceptable in Window Tint?

Yes.

Automotive window film is installed on the inside of the glass, so rain or snow outside doesn't automatically prevent installation.

Weather can affect curing time afterward, especially in colder temperatures.

Read:

Can I Get My Windows Tinted If It's Raining or Snowing?

Quality automotive window film can last for many years when it's properly installed and properly maintained.

Film quality matters.

Installation quality matters.

Aftercare matters too.

Using appropriate cleaning products and taking care of the film can make a major difference in longevity.

Read our complete guide:

How Long Does Tint Last on a Car? 2026 Window Tint Guide

Your Tundra being a pickup truck doesn't automatically make every aftermarket tint percentage legal on every window.

This is particularly important when discussing the:

• Two front door windows
• Full windshield

Before choosing a percentage, understand New Jersey's current window-tint requirements.

Read:

New Jersey Window Tint Laws: Complete 2026 Guide

Don't assume a tint setup complies with New Jersey law simply because you see other Tundras driving around with dark front windows.

What another driver chooses doesn't determine what the law permits.

Before tinting the front doors or windshield, understand the potential enforcement consequences.

Read:

Can Cops Pull You Over for Just Window Tint in New Jersey? 2026 Guide

Vehicle-specific experience matters.

We've already worked on the 2022–present Tundra platform.

We know:

• The front doors are straightforward
• The rear doors are straightforward
• The gaskets aren't unusually tight
• Door panels don't need to be removed with our process
• The power rear window requires additional attention
• Film needs to extend properly below the rear-window gasket
• Poor rear-window installation can lead to peeling
• Windshield installations require proper dashboard protection
• Installation solution needs to be controlled around sensitive electronics
• 20% provides a good visual match to the factory rear privacy glass based on our experience
• Two-front-window installations generally take 45 minutes to 1 hour
• Complete four-door/rear-window installations generally take 2 to 2½ hours

You're not paying us to learn those things for the first time while we're working on your truck.

Based on our experience with the 2022–present Tundra, 20% aftermarket window film on the two front doors provides a good visual match to the factory rear privacy glass.

We're describing 20% as the film percentage that provides a good visual match. We're not claiming every Tundra's factory glass measures exactly 20% VLT.

At Dope Tintings, current pricing for the four doors and rear window is $274.99 standard, $349.99 carbon and $449.99 ceramic.

Approximately 45 minutes to 1 hour at our shop.

Approximately 2 to 2½ hours for the four doors and power rear glass.

Overall, we consider it straightforward for an experienced professional. The power rear glass is the most notable installation challenge.

Yes. It can be professionally tinted, but proper preparation and film placement below the gasket are important.

Improper film placement can potentially cause peeling as the window operates. The film needs to be properly installed below the gasket.

Not with our normal installation process.

The film installation itself is relatively straightforward for a professional, but dashboard protection and solution control are extremely important.

Carbon can be a strong choice if you want the factory-match appearance plus additional heat rejection without paying ceramic pricing.

For the typical customer only tinting the two fronts, we don't automatically recommend paying for ceramic solely for heat rejection. Carbon may provide a better balance.

Consider covering the major glass areas, including the doors, rear glass, windshield and panoramic roof when equipped, with an appropriate high-performance film.

If appearance is your only goal, you may not need to. If you want additional film performance, heat rejection, privacy or darkness, tinting over the factory rear glass may make sense.

No. Pickup trucks are excluded.

No. Pickup trucks are excluded from that package as well.

Dope Tintings provides professional Toyota Tundra window tinting in Pennsauken, New Jersey.

We regularly serve customers from:

• Pennsauken
• Cherry Hill
• Camden
• Maple Shade
• Cinnaminson
• Delran
• Collingswood
• Haddonfield
• Marlton
• Mount Laurel
• Moorestown
• Camden County
• Burlington County
• Throughout South Jersey

Whether you're looking for 20% on the two front Tundra windows to match the factory rear privacy glass or you're considering tinting the entire truck, contact us with your exact year and trim.

At Dope Tintings, we've been installing automotive window film for more than 20 years and have tinted tens of thousands of vehicles.

We're focused on installation quality rather than seeing how quickly we can push vehicles through the shop.

Our Tundra installation experience includes:

• Proper preparation
• Contamination control
• Factory rear-glass matching
• Experience with Toyota's power vertical rear window
• Proper film placement below the rear gasket
• No unnecessary door-panel removal with our normal process
• Windshield dashboard protection
• Careful installation-solution control
• Multiple film options
• Final quality-control inspection

We're a quality-focused shop, not a quantity-focused shop.

The 2022–present Toyota Tundra is a relatively straightforward truck for an experienced professional window tinter, but its power vertical rear window makes the complete installation different from many other pickup trucks.

The film on that rear glass needs to be installed properly below the gasket so repeated operation of the window doesn't create peeling problems.

For a complete four-door and rear-window installation, our current pricing is:

• $274.99 standard
• $349.99 carbon
• $449.99 ceramic

Installation generally takes approximately 2 to 2½ hours.

If you're simply trying to make the two front windows look like the darker factory rear glass, 20% provides a good visual match based on our experience with this Tundra generation.

A two-front-window installation generally takes us approximately 45 minutes to 1 hour.

That's exactly what we installed on the real 2026 Toyota Tundra pictured throughout this guide.

For customers interested in heat rejection rather than appearance alone, we can discuss carbon, ceramic and whether it makes more sense to cover additional glass throughout the truck.

Looking to tint your 2022–present Toyota Tundra?

Contact Dope Tintings for current pricing and appointment availability.

Dope Tintings Automotive Window Tint
6830 N Crescent Blvd
Pennsauken, NJ 08110

Phone: 856-577-4119

When calling, tell us:

Year + Toyota Tundra + trim + which windows you want tinted.

If you only want the fronts to match the factory rear glass, tell us you're looking for the 20% two-front-window factory match.

If heat rejection is your priority, let us know that too so we can help you compare standard, carbon, ceramic and complete-vehicle options.