At Dope Tintings, pricing to tint the side windows and rear window of a 2008–2015 Dodge Challenger is:

• Standard Film: $224.99
• Carbon Film: $324.99
• Ceramic Film: $424.99

Installation generally takes approximately 1 hour and 45 minutes to 2½ hours.

The exact installation time can vary because the Challenger's rear window has thick defroster lines that can require additional cleaning and preparation.

The 2008–2015 Dodge Challenger does not qualify for our $99 or $149.99 tint specials because of the additional work required on the rear glass.

For the 2012 Challenger featured in this guide, the customer selected 20% Standard film on the side windows and rear window.

If you own a 2008–2015 Dodge Challenger and are thinking about getting the windows tinted, this guide will show you what to expect before scheduling your installation.

At Dope Tintings in Pennsauken, NJ, we've tinted Dodge Challengers from this generation and there are a few things about this vehicle that owners should know.

The side windows are fairly straightforward.

The rear window is where the extra work comes in.

For this guide, we're using a real 2012 Dodge Challenger base model that came into our shop for 20% Standard window tint on the side windows and rear glass.

The customer's main goals were appearance, additional privacy and glare reduction. Heat rejection wasn't a major concern, which is why our Standard film made sense for this particular customer.

This guide covers 2008–2015 Dodge Challenger window tint pricing, tint shades, installation difficulty, film options, installation time, rear defroster concerns and what 20% tint actually looks like on the vehicle.

The 2012 Dodge Challenger shown in our photos has 20% window tint installed on the side windows and rear glass.

20% is one of the more popular percentages for customers who want their vehicle to have a noticeably darker appearance without going as dark as 5%.

Here's an easy way to understand the percentage:

20% tint allows approximately 20% of visible light through the film and blocks approximately 80%.

One common mistake customers make is assuming that a higher tint percentage means darker tint.

It's actually the opposite.

The lower the percentage, the darker the window tint.

So:

• 35% is lighter than 20%
• 20% is darker than 35%
• 15% is darker than 20%
• 5% is significantly darker than 20%

For this Challenger, 20% gives the black vehicle a darker overall appearance while also providing more privacy than a lighter percentage such as 35%.

This really comes down to the customer rather than the vehicle.

We don't recommend a particular tint percentage simply because someone owns a Dodge Challenger.

The vehicle doesn't determine how dark you should go.

Your preference does.

If you're trying to decide between 20% and 35%, the biggest differences are appearance, privacy and visibility.

20% gives you:

• More privacy
• A noticeably darker appearance
• Good daytime visibility
• More glare reduction
• A look similar to the factory privacy glass commonly seen on the rear of many SUVs and crossovers

Nighttime visibility is still manageable for many customers, but everyone's tolerance is different.

One situation where you may notice the darkness more is while parallel parking at night. Some customers may need to roll the windows down to get a clearer view of the curb, wheels or nearby vehicles.

35% gives you:

• A lighter appearance
• Less daytime privacy
• Excellent daytime visibility
• Easier nighttime visibility
• A clean, classy tinted appearance

We usually describe 35% as a good option for someone who wants their vehicle to look tinted but doesn't necessarily want a dark appearance.

If you're trying to decide between these two percentages, read our complete guide:

Is 20% or 35% Tint Darker? 20% vs. 35% Window Tint Explained

That guide goes deeper into the differences between the two percentages, including privacy, appearance and nighttime visibility.

This is something customers should understand before selecting their tint percentage.

At Dope Tintings, we have a percentage tint board inside our shop.

The board allows customers to look through different percentages such as 35%, 20%, 15% and 5% before making their decision.

But there's something very important to understand:

The percentage you see on a tint display may appear darker once that same film is installed on your entire vehicle.

Why?

Because you're no longer looking through one isolated piece of tinted glass.

Once the Challenger's door windows, quarter windows and rear window are all tinted, you're reducing the amount of light entering the vehicle from multiple directions.

That can make the entire interior appear darker.

We've had customers select a percentage after looking at our tint board and then come back to pick up their vehicle surprised by how much darker the completed vehicle looked.

The percentage didn't change.

The difference is that multiple windows are now tinted instead of looking through one sample of film.

Keep this in mind when comparing tint percentages.

From an installer's standpoint, this generation Challenger isn't extremely difficult overall, but there is one area that requires extra attention.

The front door windows are fairly easy to tint.

However, we prefer removing the door panels on this generation Challenger.

Removing the panels isn't absolutely necessary, but we've found that it allows us to achieve a cleaner installation, particularly toward the bottom of the glass.

Our goal isn't simply getting film onto the window.

We want the finished installation to look as clean as possible.

The quarter windows are relatively straightforward.

There's nothing unusually difficult about tinting these windows when compared with many other coupes.

The rear window is the challenging part of this vehicle.

And it's one of the reasons this Challenger doesn't qualify for our lower-priced tint specials.

One thing we've noticed from tinting Dodge Challengers and Dodge Chargers is that their rear defroster lines can be considerably thicker than those found on many other vehicles.

Those thick defroster lines require additional cleaning and preparation.

This is important because contamination can collect around the defroster lines.

If the glass isn't properly prepared before the film is installed, small bubbles can develop directly along those lines.

In the tint industry, installers sometimes refer to these as "popcorns."

Essentially, you'll see small raised areas where the window film isn't completely adhering around the defroster line.

This doesn't mean every Challenger rear window is going to have problems.

It means the installer needs to understand the vehicle and spend additional time preparing the glass.

Don't immediately assume the rear window needs to be retinted.

Window film needs time to properly dry and cure.

If you notice small areas along the defroster lines while the film is still curing, give the film time.

Once the film has cured, some small areas may be able to be gently pressed back against the glass along the defroster line.

If the film refuses to stay down or the problem continues after the curing period, bring the vehicle back to the tint shop so the installer can inspect it.

Depending on the situation, the installer may be able to correct the affected area.

If the problem is severe enough, the rear window may need to be retinted.

This is why proper rear-glass preparation is especially important on Dodge Challengers.

Another detail we pay attention to at Dope Tintings is the third brake light.

Whenever the vehicle allows us to do it properly, we prefer tinting the entire tintable area of the rear glass rather than leaving a large cutout around the third brake light.

We think unnecessary brake-light cutouts can make the finished installation look incomplete.

On the Challenger, this can require additional work because the brake-light area may need to be removed or worked around during installation.

It takes more time, but our goal is to create a cleaner finished appearance.

For the sides and rear window of this generation Challenger, our pricing is:

Let's break down the differences.

Our Standard film package is $224.99 for the sides and rear window of this Dodge Challenger.

Standard film is primarily for customers looking for:

• Appearance
• Privacy
• Glare reduction
• An affordable tint option

It's a basic window film and isn't the package we recommend when heat rejection is the customer's main priority.

There's another difference customers should know about.

With our Standard film package, the roll-down windows are computer cut.

When you roll the windows down, you may see approximately a 1/8-inch to 1/4-inch gap along the top edge of the glass, depending on how the computer cuts the pattern.

This is normal for our Standard package.

For the 2012 Challenger featured in this article, the customer chose our Standard film because his primary goals were appearance, privacy and glare reduction.

He wasn't concerned about upgrading for additional heat rejection.

Our Carbon film package is $324.99 for the sides and rear window.

Carbon provides better heat rejection than Standard film.

There's also another important installation difference.

With our Carbon package, the film on the windows that roll up and down goes to the edge of the glass.

That means you don't see the computer-cut gap found with our Standard package.

Instead, you get a cleaner factory-style edge.

Carbon is a good middle-ground option for Challenger owners who want:

• Better heat rejection
• A cleaner factory-style edge
• Good appearance
• Privacy
• Lifetime-quality film

Our Ceramic film package is $424.99 for the sides and rear glass.

Ceramic provides our highest level of heat rejection among these three options.

Like Carbon, the roll-down windows receive a factory-style edge with the film going to the top of the glass.

There is no Standard-package computer-cut gap.

Ceramic makes the most sense for customers who place a high priority on heat rejection.

However, the most expensive film isn't automatically the best choice for every customer.

If you're primarily tinting the side windows and rear glass for appearance and privacy and aren't concerned about maximizing heat rejection, you may not necessarily need Ceramic.

We prefer matching the film to what the customer actually wants instead of automatically pushing everyone toward the most expensive package.

No.

This generation Dodge Challenger does not qualify for our $99 or $149.99 window tint specials.

The biggest reason is the rear window.

Because of the thick defroster lines, the rear glass requires additional preparation and installation time.

This is a good example of why simply being a two-door vehicle doesn't automatically mean a car qualifies for one of our specials.

Two coupes can require completely different amounts of labor.

The Challenger's rear glass pushes this vehicle outside the requirements for those lower-priced packages.

A complete side-and-rear installation generally takes approximately:

1 hour and 45 minutes to 2½ hours.

The biggest variable is usually the rear glass.

If the rear defroster lines require additional cleaning or preparation, the vehicle may take closer to the longer end of that range.

We'd rather spend additional time properly preparing the rear window than rush the installation and create problems later.

This is where customers need to separate tint percentage from which window is being tinted.

New Jersey's tint laws don't simply say that a certain percentage is legal everywhere on the vehicle.

Where the film is installed matters.

That means someone shouldn't assume that because 20% can be installed on one area of a vehicle, it's automatically legal on every window.

We've put together a complete explanation of New Jersey's tint rules here:

New Jersey Window Tint Laws: Complete 2026 Guide

That guide goes deeper into front side windows, rear windows, windshields, medical exemptions and other questions New Jersey drivers commonly have about window tint.

This is another question we hear regularly.

Window tint can attract attention from law enforcement depending on where the film is installed and how dark the vehicle appears.

We've covered this subject separately in our guide:

Can Cops Pull You Over for Just Window Tint in New Jersey? 2026 Guide

If you're considering darker tint on your Challenger, it's worth understanding New Jersey's tint laws before deciding what windows you want tinted.

The Challenger featured throughout this guide is a 2012 Dodge Challenger base model.

The customer selected:

20% Standard Window Film

We tinted:

• Driver-side door window
• Passenger-side door window
• Rear quarter windows
• Rear glass

The customer's primary goals were:

• Appearance
• Additional privacy
• Glare reduction

Heat rejection wasn't a major concern.

Because of that, there wasn't a reason to push the customer toward Carbon or Ceramic when Standard film already matched what he wanted from the installation.

The finished 20% gives this black Challenger a noticeably darker appearance while still maintaining more visibility than extremely dark percentages such as 5%.

If you own a 2008–2015 Dodge Challenger, one of the first places we'd recommend inspecting after the film cures is the rear window.

Pay particular attention to the defroster lines.

Look for:

• Film lifting around the defrosters
• Persistent bubbles along the defroster lines
• Poor rear-glass preparation
• Excessive contamination
• Unnecessary brake-light cutouts
• Poorly positioned film
• Uneven edges

Also inspect the door glass.

A professional installation should look consistent across the vehicle.

The Challenger isn't necessarily the hardest car in the world to tint, but the rear window is one area where an experienced installer can make a difference.

At Dope Tintings, pricing for the side windows and rear glass starts at $224.99 for Standard film, $324.99 for Carbon film and $424.99 for Ceramic film.

A 2008–2015 Dodge Challenger generally takes approximately 1 hour and 45 minutes to 2½ hours to tint. The rear defroster lines can require additional preparation, which may increase installation time.

There isn't one percentage that's best specifically for a Challenger. Tint darkness comes down to personal preference. 20% is a popular option for customers looking for privacy and a darker appearance, while 35% is lighter and provides easier nighttime visibility.

Yes. 20% tint is darker than 35% tint. 20% allows approximately 20% of visible light through, while 35% allows approximately 35% through. The lower the percentage, the darker the film.

For a complete comparison, read our 20% vs. 35% Window Tint Guide.

The rear window has thick defroster lines that can hold contamination and require additional preparation. If the lines aren't properly cleaned and prepared, bubbles can develop along them after the film is installed.

Removing the panels isn't absolutely required, but we prefer removing them on this generation Challenger because it can help us achieve a cleaner installation toward the bottom of the door glass.

No. The 2008–2015 Dodge Challenger doesn't qualify because the rear glass requires additional preparation and installation time.

Yes. With our Carbon and Ceramic packages, we take the film to the edge of the roll-down glass to create a factory-style finish. Our Standard package is computer cut and may leave approximately a 1/8-inch to 1/4-inch gap along the top edge.

It depends on what you're trying to accomplish. If heat rejection is a major priority, Ceramic provides the greatest heat rejection of our three main packages. If you're primarily looking for appearance, privacy and glare reduction, Standard or Carbon may be enough.

Small areas can sometimes appear around thick defroster lines while window film is curing. Allow the film time to dry first. If the film still won't properly adhere after curing, the tint shop should inspect the rear glass.

Want to see more Dodge vehicles we've tinted at our Pennsauken shop?

View our Dodge Window Tint Photo Gallery

Our photo galleries show actual vehicles we've tinted so customers can get a better idea of how different shades and vehicles look after installation.

If you own a 2008–2015 Dodge Challenger and you're looking for professional window tinting in Pennsauken or South Jersey, Dope Tintings can help you decide which film and percentage make the most sense for what you're trying to accomplish.

We regularly serve customers from:

• Pennsauken
• Cherry Hill
• Camden
• Cinnaminson
• Maple Shade
• Collingswood
• Palmyra
• Delran
• Mount Laurel
• Surrounding Camden County and Burlington County communities

We've been tinting vehicles for more than 20 years and have tinted more than 30,000 vehicles.

Whether you're looking for a darker appearance, more privacy, glare reduction or better heat rejection, we'll help you choose a package based on what you actually want from your tint.

Call Dope Tintings at 856-577-4119 for a Dodge Challenger window tint quote.

Dope Tintings Automotive Window Tint
6830 N Crescent Blvd
Pennsauken, NJ 08110